Overview

Best in class MIPI® UniPro Verification IP for your IP, SoC, and system-level design testing.

In production since 2011 on dozens of production designs.

Incorporating the latest protocol updates, the mature and comprehensive Cadence® Verification IP (VIP) for the MIPI ® UniProsm Protocol provides a complete bus functional model (BFM), integrated automatic protocol checks, coverage model, and compliance tests. Designed for easy integration in testbenches at IP, system-on-chip (SoC), and system levels, the VIP for UniPro helps you reduce time to test, accelerate verification closure, and ensure end-product quality. Our VIP runs on all major simulators and supports SystemVerilog and e verification languages along with associated methodologies, including the Universal Verification Methodology (UVM) and Open Verification Methodology (OVM).

Supported Specifications: MIPI UniPro v1.6, v1.8 and v2.0 and M-PHY v4.0, v4.1, and v5.0.

MIPI UniPro diagram

Product Highlights

  • Compliance: Contains predefined checks to verify that the DUT agents adhere to the protocol rules

  • Error Detection: Supports error detection on all layers, more than 200 different protocol checks.

  • Coverage: Monitors, checks, and collects coverage on bus traffic using hundreds of automatic protocol checks, including configuration and runtime checks.

  • Error Injection: Random and pre-defined error injections promote easy testing of scenarios and scenario creations.

  • Environment Setup: Configurable environment layers allow for early and specified verification of Data Link Layer.

  • Traffic: Generates UniPro traffic on both transaction classes for master and slave and supports constrained-random bus traffic generation.

  • Packet tracker creation for easy debugging

  • Callbacks access at multiple TX and RX queue points for scoreboarding and data manipulation

  • Dynamic activation to enable setting the VIP as active/passive during run time

Key Features

The following table describes key features from the specifications that are implemented in the VIP:

Feature Name

Description

Serial and RMMI Interfaces
  • Supports Serial and RMMI interfaces (downstream)

CPort Signal Interface
  • Supports CPort signal interface (upstream)

All Layers Supported
  • Supports PHY Adapter, Data Link, Network, and Transport layers

Built-In Sequences
  • PA link start up, (re-)initialization, configuration, error-recovery, and hibernate enter/exit sequences

Data Link Layer
  • Supports DLL initialization, TC0 and TC1, flow control, and acknowledgment mechanisms

Transport Layer
  • Supports TL connection management and addressing, segmentation and reassembly,
    end-to-end flow control, and multi-CPort arbitration

Lane Capabilities
  • Supports up to four lanes, PWM G1-G7, HS G1-G5 in each direction, and A/B HS rate series

Connectivity Capabilities
  • Supports testing of 1.6, 1.61, 1.8, and 2.0 connection compatibility

PHY Testing
  • Complete support of test mode

Test Feature
  • Supports complete test feature functionality

CDR
  • Supports Clock Data Recovery

Simulation Test Suite

Extensive testsuite, coverage model, and verification plan with clear linkage to the specification for simple and fast compliance testing.

TripleCheck Test Suite

Master Your Tools

Tutorials, Documentation, and Local Experts

Cadence Online Support

Increase your efficiency in using Cadence Verification IP with online trainings, VIP Portal, application notes, and troubleshooting articles

Learn More

Related Products

System VIP
Protocol IP
Xcelium Logic Simulation
Palladium Emulation