Overview

Gold standard for JEDEC® HBM3 memory device for your IP, SoC, and system-level design verification. 

First to market with multiple early adopters of production designs.

This Cadence® Verification IP (VIP) provides support for the High-Bandwidth Memory (HBM3) interface. It provides a highly capable compliance verification solution applicable to IP, system-on-chip (SoC), and system-level verification. The Cadence Memory Model for HBM3 models a single channel of HBM3 DRAM; this model can be replicated for multiple channels and stacks. The Memory Model for HBM3 runs on all leading simulators, and leverages the industry-standard Cadence Memory Model core architecture, interface, and use model.

HBM3 diagram

Product Highlights

  • Hundreds of protocol and timing checkers to easily catch design bugs
  • Hundreds of predefined configurations based on specific memory vendors' part number, datasheets, or generic JEDEC definitions available on ememory.com
  • Transaction and memory callbacks for all protocol, model states, and device memory events
  • Ability to optionally skip initializations or dynamically change configuration parameters
  • Ability to dynamically change Density or Speedbin of the device memory
  • Packet tracker creation for easy debugging
  • Extensive functional coverage in SystemVerilog
  • Integrated with the DFI HBM solution for IP-level verification
  • Plug-and-play connectivity to System Performance Analyzer for subsystem or SoC performance verification
  • Support testbench language interfaces for SystemVerilog, UVM, OVM, and SystemC

Key Features

The following table describes key features from the specifications that are implemented in the VIP:

Feature Name

Description

Speed (MHz)
  • Clock: 1800MHz; data rate: 7.2Gbps/pin

Mode Registers
  • All 16 mode registers are supported

Addressing
  • All addressing schemes with pseudo channels are supported
  • Device density from 2Gb to 32Gb per channel is supported
  • Device configuration from 8Gb, 8 High to 32Gb 16 High are supported

HBM3 Functionality
  • Precharge, Activate, Read, Write, Mode Register Set, Power Down, Self Refresh, and all related timing checks

Clocking and Reset
  • Differential clock inputs (CK_t/CK_c) and Active Low Reset Line (reset_n)

Initialization
  • Supports initialization with all tINIT* timing checks with options to skip initialization

Trainings
  • Supports WDQS-to-CK alignment training

DCA, DCM
  • Supports Duty Cycle Monitor and Duty Cycle Adjuster operations

Read/Write
  • Supports new WDQS-based architecture with 2X WDQS speed for Read and Write
  • Preamble and Postamble are supported
  • WDQS timing parameters and differential clocks are checked
  • tCCD related checkers are implemented
  • Supports unmatched WDQS to DQ path parameter - tWDQS2DQ
  • Supports auto-precharge feature

Refresh
  • Supports Refresh, Refresh Management, and Adaptive Refresh Management

SID
  • The stack ID (SID) acts as a bank address bit during command execution

Command Spacing
  • Command spacing checks

Bank Groups
  • Timing associated with back-to-back accesses to the same and different bank group

Command, Data Parity
  • Supports Command/Address parity, Data parity, and related checks

Data Bus Inversion (DBI)
  • Supports Write/ Read data inversion

IEEE 1500 Functionality
  • Supports all IEEE 1500 instructions decoding
  • Supports functionalities of instructions, likes of Mode Register Dump Set, HBM_RESET, Device ID, Channe Disable, etc

Loopback Test Mode
  • Supports all modes of AWORD and DWORD MISR operations

Boundary Scan
  • Supports Extest TX/RX instructions to test I/O connectivity

Redundancy Remapping
  • Supports Soft/Hard lane repair of AWORD, DWORD

WDQS Internal Oscillator
  • Supports WOSC operation using its IEEE instructions

ECC Engine Test Mode
  • Supports ECC engine test mode of operation

Temperature Compensated Refresh
  • Supports refresh rate information on TEMP pin, also supports sticky CATTRIP pin

Simulation Test Suite

MM has a rich test suite of scenarios for easy MM evaluation and deployment.

Please contact us for further information.

Master Your Tools

Tutorials, Documentation, and Local Experts

Cadence Online Support

Increase your efficiency in using Cadence Verification IP with online trainings, VIP Portal, application notes, and troubleshooting articles

Learn More

Related Products

System VIP
Protocol IP
Xcelium Logic Simulation
Palladium Emulation