Best in class MIPI® SoundWiresm Verification IP for your IP, SoC, and system-level design testing.

In production since 2015 on dozens of production designs.

The Cadence®Verification IP (VIP) for the MIPI® SoundWiresm Protocol provides a bus functional model (BFM), integrated automatic protocol checks and coverage model. It supports active or passive Manager, monitor, and a configurable number of Peripherals (1-11).

MIPI Soundwire diagram

Product Highlights

  • Support testbench language interfaces for SystemVerilog, UVM, OVM, e, and SystemC
  • Generates constrained-random bus traffic with predefined error injection
  • Callbacks access at multiple TX and RX queue points for scoreboarding and data manipulation
  • Packet tracker creation for easy debugging of frames and data payload
  • Dynamic activation to enable setting the VIP as active/passive during run time
  • Provides extensive coverage in e and SystemVerilog

Key Features

The following table describes key features from the specifications that are implemented in the VIP:

Feature Name

Description

Multi-lane Payload Transport

  • Up to 8 data lanes are supported

High-PHY Mode

  • High-performance PHY

Synchronization

  • Sync Peripheral with Manager SoundWire frame

Enumeration

  • Manager assigns Dev_num for each newly attached Peripheral

Data Payload Traffic

  • Peripheral and Manager devices can send data payload traffic

Bank Switching

  • Frame size and DP channels can be switched during activity

Resets

  • Ability to perform all kinds of resets on the fly

Error Scenarios

  • Manager and Peripheral can generate error scenarios

Interrupts

  • Peripheral VIP replies automatically when interrupt needs to be generated based on configuration

Dynamic Peripheral Devices

  • Dynamic addition and removal of Peripheral devices

Multicast and Broadcast Peripheral Accesses

  • Manager can access Peripheral registers through broadcast and multicast

Test Data Modes

  • Support of static and PRBS data payload sending

Peripheral Command Responses

  • Peripheral VIP automatically replies with appropriate command responses

Command Ownership

  • Monitor can take command ownership from Manager

Flow Control

  • Peripheral and Manager devices can send asynchronous data payload traffic

Bulk Payload

  • Peripheral and Manager devices support Bulk Payload Transport Protocol

Manager PHY Test mMdes

  • Manager device supports PHY test modes

Full, reduced, and simplified data ports

  • Support in Full, Reduced, and Simplified Data Ports

Limited WordLength

  • Support in a limited set of values of the WordLength field

SDCA Interrupt Handling

  • Support all the SDCA interrupt registers and interrupt cascading

Severe Reset

  • Support to handle severe reset condition added

PHY Controlling Registers

  • Added support for PHY controlling registers

Simulation Test Suite

Extensive testsuite, coverage model, and verification plan with clear linkage to the specification for simple and fast compliance testing.

Master Your Tools

Tutorials, Documentation, and Local Experts

Cadence Online Support

Increase your efficiency in using Cadence Verification IP with online trainings, VIP Portal, application notes, and troubleshooting articles