Virtuoso Digital Implementation Training
日期 | 版本 | 国家/地区 | 位置 | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
版本 | 区域 | |
---|---|---|
22.1 | Online | ENROLL |
21.1 | Online | ENROLL |
20.1 | Online | ENROLL |
19.1 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Length: 3 Days (24 hours)
Become Cadence Certified
Course Description
(Note: This course is based on the Stylus Common UI.)
Virtuoso® Digital Implementation is a complete and automatic synthesis/place-and-route system. It enables capacity-limited block implementation for small digital components in the context of an advanced analog-driven mixed-signal design.
In this course, you learn the basics of synthesis and digital implementation by using the Virtuoso Digital Implementation software. You will explore synthesis, floorplanning, placement, power planning, clock-tree synthesis, timing optimization, and detail routing using VDI.
Learning Objectives
After completing this course, you will be able to:
- Run the recommended RTL synthesis flow
- Constrain designs and optimize for timing and power
- Floorplan the design
- Run placement, optimization and timing analysis
- Run clock-tree synthesis, detail routing and verification
- Run Stylus Flow Generation to automate the implementation flow
Software Used in This Course
- Digital Design Implementation System
The software includes Genus Synthesis Solution, Joules, and Innovus Implementation System.
Software Release(s)
DDI221
Modules in this Course
- Refresh: Static Timing Analysis (STA) Fundamentals
- Virtuoso Digital Implementation Synthesis Fundamentals
- Synthesis Optimizations
- Power Optimization
- Test Synthesis
- Interfacing with Logic Equivalence Checking and Other Tools
- Physical Implementation Overview
- Floorplanning the Design
- Planning and Routing Power
- Running Placement Optimization and Early Global Route
- Timing Analysis and Optimization
- Implementing the Clock Tree
- Detail Routing for Signal Integrity, Timing, and Design for Yield
- Design Finishing
- Summary of Implementation Steps
- Stylus Flow Generation
Audience
- Mixed-Signal Designers
- Custom IC Engineers
Prerequisites
You must have experience with or knowledge of the following:
- Place-and-Route Tools or Physical Design
Related Courses
Please see course learning maps at this link for a visual representation of courses and course relationships. Regional course catalogs may be viewed here.
ONLINE TRAINING
Genus Synthesis Solution v16.1
This online class features the Cadence® Genus™ Synthesis Solution with next generation synthesis capabilities and how SoC design productivity gap is filled by Genus
"The course gives a good overview of the digital flow capability and the way to use the tools."
Claire Tassin, Schlumberger
"This course was a summary of two weeks in two days(…)adapted(…)to our expectations. Very interesting training to apprehend the concept of digital design flow with very good speakers."
Fabrice Voisin, APC - Astroparticule et Cosmologie
"it was very helpful"-Online Course-
Aalaa Abdel Mordy, Vidatronic