Allegro PCB Editor Intermediate Techniques Training
Date | Version | Country | Location | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
Version | Region | |
---|---|---|
17.2-2016 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Length : 2 days
Course Description
TheAllegro® PCB Editor Intermediate Techniques course gives you a deeper understanding of the software, and includes features and tips. You apply constrains, autoroute high-speed designs, and work with differential pairs. In this course, you also explore high-speed design rules, create areas in your design that require different routing rules, and generate testpoints. In the task-oriented labs, you use a combination of interactive and automatic tools.
This is the second in a two-course series. You need to complete the Allegro PCB Editor Basic Techniques course before taking this one or have the equivalent work experience.
This course requires the SPB17.2-2016 software or later.
Learning Objectives
After completing this course, you will be able to:
- Work with split planes
- Use the constraint manager efficiently
- Autoroute high-speed designs
- Create rules and route differential pairs
- Perform interactive bus routing
- Perform advanced interactive and automatic routing of critical nets
- Generate testpoints
- Place parts based upon design-for-assembly rules
- Write extract programs
- Use existing SKILL® programs in the PCB Editor
- Create designs with split and complex power planes
- Use the automatic glossing routines
Software Used in This Course
- Allegro PCB Designer license
Software Release(s)
- SPB 17.2-2016
Modules in this Course
- Reuse of design constraints
- Split and complex planes
- Unused pad suppression
- Testpoint generation
- Interactive routing tips and techniques
- High-speed etch editing
- High-speed constraints using the Constraint Manager
- Advanced constraints
- Differential pairs
- Design for assembly
- Tips and Tricks
- Writing extract programs
- Using SKILL in the PCB Editor
- Glossing the Design
Audience
- CAD Engineers
- Designers
- Electrical Engineers
- Layout Designers
- PCB Designers
- PCB Layout Designers
Prerequisites
You must have experience with or knowledge of the following:
- Board layout and design
Or you must have completed the following courses:
System Requirements for Online Courses
- Cadence® software as listed above installed and licensed
Related Courses
Click here to view course learning maps, and here for complete course catalogs.
"This is a great environment for learning, very peaceful and secure. The instructors are knowledgeable and friendly and easy to ask any questions.”
Yogesh Patel, Schneider Electric
"The training was great and satisfying my needs. I especially like the lab and the support of the instructor in doing this lab."
Eslam Sawaby, Valeo
"The course was well prepared and I think that giving us time to do the labs after explanations is a really good way to directly practice our learning. (...) the contents were clear and easy to understand. The teacher was nice and took time for us."
Ruben Guerreiro, Meggitt Sensing Systems
"Very good training."
Hao Li, Incoatec
“Great class, learned a lot. Very well presented, excellent labs with good docs.”
Debra Lefley, Broadcom
“This training was very good. In 15 modules I learned a lot about the PCB Editor, each lesson was finished with some tutorials to practice the work with the tool.”
Volker Rittmann, Incoatec