Allegro Design Entry Using OrCAD Capture Training
Date | Version | Country | Location | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
Version | Region | |
---|---|---|
17.2-2016 | Online | ENROLL |
16.6-2015 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Length : 2 days
Course Description
In this course, you begin with some basic schematic library development. You create and process a simple design, and then you progress into multi-sheet and hierarchical designs. You also apply part and net properties.
Learning Objectives
After completing this course, you will be able to:
- Build Capture library parts
- Create a new project
- Create multi-sheet flat and hierarchical designs
- Copy work between projects
- Assign reference designators
- Perform design checking
- Add inter-sheet signal references
- Create a Bill of Materials report
- Add part and net properties
- Create a netlist for Cadence® Allegro® PCB Editor
Software Used in This Course
- PS2005 Allegro Design Entry Capture
Software Release(s)
- SPB 17.2 or higher
Modules in this Course
- Module 1: Allegro Design Entry Using OrCAD Capture
Audience
This is an introductory level course intended for new Cadence OrCAD® Capture users.
Prerequisites
You must have experience with or knowledge of the following:
- Familiar with a PC and Windows operating system
- Experience with schematic entry and board layout components is also helpful
System Requirements for Online Courses
- For system requirements click here
- Cadence software as listed above installed and licensed
Related Courses
Click here to view course learning maps, and here for complete course catalogs.
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"The course was optimal for beginning with OrCAD Capture. Documentation and labs are useful for further reference.”
Georg Guldan, emz-Hanauer
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"OrCad is a good product and the course was very well done."
Mauro Piscitello, Magneti Marelli
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
“Informative and easy to follow. Good approach to very basic using steps of Cadence schematic.”
Bernhard Foerst, Loewe Technologies
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"The course was well-prepared. I could ask many questions."
Thomas Geiger, Pepperl+Fuchs
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"The training was very good and informative. The lecturer was able to explain all objects in a simple way and answered all our questions."
Soran Majied, Freescale Semiconductors
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
“good and competent”
Wolfgang Quehl, Loewe Technologies