DE-HDL Library Development using DE-HDL Training
Date | Version | Country | Location | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
Version | Region | |
---|---|---|
23.1QIR1 | Online | ENROLL |
22.1QIR1 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Length: 2 Days (16 hours)
Become Cadence Certified![](https://cdn2.dcbstatic.com/files/c/a/cadence_docebosaas_com/wysiwyg_upload/1714432372019-J30997_Allegro_X_Design_Entry_HDL_Librarian_SPB23_1.png)
Course Description
In this course, you learn to create schematic libraries for Allegro® X Design Entry HDL and footprint libraries for use with the Allegro X PCB Editor. About 75% of the course time is focused on front-end schematic library development, and the remaining 25% is spent on back-end footprint creation. You create a project area for building schematic symbols, pin maps, part tables, and package symbols. You also test these part definitions in a front-to-back flow.
Allegro X PCB Editor footprint creation is also covered in the Allegro X PCB Editor course. See the list of Related Courses below.
Learning Objectives
After completing this course, you will be able to:
- Set up for library development
- Create symbol, package, part table, and simulation views
- Create asymmetrical and split parts, and build new parts from existing ones
- Test parts
- Build padstacks and package symbols
Software Used in This Course
- Allegro Managed Library Authoring
- Allegro PCB Designer
Software Release(s)
SPB23.1
Modules in this Course
DE-HDL Library Development
- Introducing DE-HDL Library Development
- Setting Up a Build Area
- The Symbol View
- The Chips View
- The Part Table View
- The Simulation View
- Testing the Part
- Building a 74LCX125
- Building a Resistor Network
- More Part Building
- Advanced Skills
PCB Editor Library Development
- Padstack Editor
- Symbol Editor
- Package Symbol Wizard
- Custom Padstacks
- Mechanical Symbols
- Edge Connectors
- Debugging Problems
Audience
- Library Developers
- Design Engineers
- PCB and CAD Support
Prerequisites
There are no prerequisites for this course
Related Courses
- Allegro X Design Entry HDL Basics
- Allegro X Design Entry HDL Front-to-Back Flow
- Allegro X PCB Editor Basic Techniques
Please see course learning maps at this link for a visual representation of courses and course relationships. Regional course catalogs may be viewed here.
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"Instructor was prepared to both listen to any contributions and explain in full to resolve any issues. Impressed by the organisation to enable a party from the UK, France, and Germany to attend the course in English, given by a Dutch Instructor. Very good surroundings and everyone(...)was very helpful and welcoming."
Phil Langston, Viavi Solutions
![](/content/dam/cadence-www/global/en_US/images/site-images/Training/quote-icon.png)
"The course was well thought out and well presented."
Chris Capon, Viavi Solutions